Table of Contents
Advertisement
Optionally, you can select channels that require picture capture. The unselected channels will
not capture picture.
1. Click
at the left bottom of live view interface.
2. Select channel(s), the checked channel(s) will capture picture. All channels are selected as
default.
Click Finish.
The smart analysis results of the detection are displayed in the list. Optionally, click a result in
list to play the related video.
Configure Live View Settings
Live View settings can be customized. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Go to System > Live View > General.
Network Video Recorder User Manual
Target Detection
75
Advertisement
Table of Contents
