Table of Contents
Advertisement
Select the alarm linkage action(s) you want to disarm for the local Alarm Input.
When Alarm Input 1 (Local<-1) is enabled with one-key disarming, the other alarm input settings
are not configurable.
Click Apply to save the settings.
Configure Alarm Outputs
Trigger an alarm output when an alarm is triggered.
Go to System> Event>Normal Event>Alarm Output.
Select an alarm output item from the list and click
Edit the alarm name.
Select the dwell time (the alarm duration) from 5s to 600s, or Manually Clear.
Manually Clear: You should manually clear the alarm when the alarm occurs. Refer to Chapter
12.10 Trigger or Clear Alarm Output Manually for detailed instructions.
Set the arming schedule. Refer to Chapter 12.1 Configure Arming Schedule.
Network Video Recorder User Manual
One-Key Alarm Disarming
143
.
Advertisement
Table of Contents
