Table of Contents
Advertisement
Upgrade the IP Camera
The IP camera can be remotely upgraded through the device.
Plug the U-flash drive with the IP camera's firmware upgrade file to the device.
On the camera management interface, select a camera.
Go to More Settings > Upgrade at the top taskbar.
Select the firmware upgrade file from the U-flash drive.
Click Upgrade.
Result:
The IP camera will reboot automatically after the upgrading completes.
Configure the Customized Protocols
Purpose
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Go to More Settings > Protocol at the top taskbar to enter the protocol management
interface.
Network Video Recorder User Manual
56
Advertisement
Table of Contents
