Region Exiting Detection - HIKVISION NVST HNR Series User Manual

Select a camera to configure.
Check Enable Region Entrance Detection.
Optionally, check Save VCA Picture to save the captured pictures of region entrance
detection pictures.
Follow threes steps to set the detection rules and detection areas.
Select Arming Area. Up to 4 areas are selectable.
Set Sensitivity.
Sensitivity: The higher the value is, the easier the detection alarm will be triggered. Its range
is [0-100].
Click Draw Region and draw a quadrilateral in the preview window by specifying four vertices
of the detection region.
Configure Arming Schedule and Linkage Action.
Click Apply.

Region Exiting Detection

Purpose
The region exiting detection function detects objects that exit from a pre-defined virtual region.
Go to System > Event > Smart Event.
Network Video Recorder User Manual
Region Entrance Detection
158