Table of Contents
Advertisement
other. If multiple devices are configured for the UPnP™ settings under the same router, the
value of the port No. for each device should be unique.
4. Enter the virtual server setting page of router; fill in the blank of Internal Source Port with the
internal port value, the blank of External Source Port with the external port value, and other
required contents.
Note
• Each item should be corresponding with the device port, including server port, http port,
RTSP port and https port.
• The virtual server setting interface below is for reference only, it may be different due to
different router manufactures. Please contact the manufacture of router if you have any
problems with setting virtual server.
11.4 Configure SNMP
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the trap
address and port, the device is allowed to send alarm events and exception messages to the
surveillance center.
Steps
1. Go to System → Network → Advanced → SNMP .
Network Video Recorder User Manual
Figure 11-3 Setting Virtual Server Item
128
Advertisement
Table of Contents
