Loitering Detection - HIKVISION DS-9600NI-I8B Series User Manual

6.2.11 Loitering Detection

Loitering detection is used to detect whether a target stays within a specified area longer than the
set time and trigger alarm for linked actions.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Loitering Detection.
4. Check Enable Loitering Detection.
5. Optional: Check Save VCA Picture to save the captured loitering detection pictures.
6. Set loitering detection parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Set Time Threshold.
Time Threshold
The time of the target staying in the region. If the value is 10, an alarm is triggered after the
target has stayed in the region for 10 s. Range: [1-10].
3) Set Sensitivity.
Network Video Recorder User Manual
Figure 6-9 Loitering Detection
64