Multi-Target-Type Detection; Loitering Detection - HIKVISION LTN07128/256 User Manual

6.2.8 Multi-Target-Type Detection

Multi-target-type detection enables the device to detect the faces, human bodies and vehicles
simultaneously in a scene.
Steps
1. Go to Smart Analysis → Smart Event Settings → Video Structuralization.
2. Select a camera.
3. Check Enable Multi-Target-Type Detection.
4. Optional: Check Save VCA Picture to save the captured intrusion detection pictures.
5. Set detection area.
1) Click Draw Area.
2) Adjust the red frame on the image to draw the detection area. It is full screen by default.
3) Click Stop Drawing.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set the linkage method. Refer to Configure Linkage Actions.
8. Click Apply.

6.2.9 Loitering Detection

Loitering detection is used to detect whether a target stays within a specified area longer than the
set time and trigger alarm for linked actions.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Loitering Detection.
Network Video Recorder User Manual
Figure 6-10 Loitering Detection
60