Vca Event Alarm; Loitering Detection - HIKVISION DeepinMind Series User Manual

Network Video Recorder User Manual
Figure 5-1 Event Hint Settings
3. Select an exception type.
Figure 5-2 Exceptions Handling
4. Set the linkage actions. Refer to Configure Linkage Actions .

5.2 VCA Event Alarm

The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
• VCA detections must be supported by the connected IP camera.
• Refer to the network camera user manual for detailed VCA detection instructions.

5.2.1 Loitering Detection

Loitering detection is used to detect whether a target stays within a specified area longer than the
set time and trigger alarm for linked actions.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events .
2. Select a camera.
58