KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 73

Step 36: Attach Glider and Swings
WARNING:
for bolts protruding beyond T-Nuts. Use
extra washers to eliminate this condition.
A: Connect the assembled Glider to the Glider Hangers previously installed. (fig. 36.1)
B: Attach 2 Belt Swings to the Bolt-Thru Swing Hangers. (fig. 36.1)
Fig. 36.1
Check entire play centre
Belt Swings
If Bolt protrudes
beyond T-Nut
Use an extra
Flat Washer
Glider
73
Other Parts
2 x Belt Swings