KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 55

Step 26: Lower Cafe Wall Assembly
Part 4
Note: Pre-drill all holes using a 1/8" drill bit before installing the lag screws.
H: Tight to the bottom of (2371) Floor End, place (2387) Side Arch flush to the outside edges of each (2383)
Post then attach with 2 (LS1) 1/4 x 1-1/2" Lag Screws (with flat washer) in the top holes. (fig. 26.9 and 26.10)
I: Attach (2387) Side Arch to (2383) Posts in the bottom holes with 2 (S2) #8 x 1-1/2" Wood Screws. (fig. 26.10)
2383
2371
Flush
2387
2383
Wood Parts
1 x Side Arch 1 x 5 x 38-1/4"
2387
Fig. 26.9
2371
2387
2383
Hardware
2 x 1/4 x 1-1/2" Lag Screw (1/4" flat washer)
LS1
2 x #8 x 1-1/2" Wood Screw
S2
with 1/4"
LS1
flat washer
Tight
S2
55
Fig. 26.10
2383