KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 50

Step 25: Lower Swing Wall Assembly
Part 1
A: Tight to the top of (2558) Ground Back and flush to the outside edges of both (2383) Posts on the Swing
Wall side attach 6 (2413) CE Siding to each post with 2 (S0) #8 x 7/8" Truss Screws per board, as shown in fig.
25.1 and 25.2. Make sure there are no gaps between boards.
B: Tight to the top (2413) CE Siding and flush to outside edges of both (2383) Posts attach (2422) Lower Back
to each post with 4 (S2) #8 x 1-1/2" Wood Screws. (fig. 25.2)
Fig. 25.1
Swing Wall
2383
Wood Parts
6 x CE Siding 3/8 x 3-1/2 x 46-5/8"
2413
1 x Lower Back 1 x 4 x 46-1/2"
2422
S2
x 4
4 x
12 x
Hardware
#8 x 1-1/2" Wood Screw
S2
#8 x 7/8" Truss Screw
S0
50
Fig. 25.2
2383
2422
2558
2413
Flush
2561
S0
x 2 per
board