KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 51

Step 25: Lower Swing Wall Assembly
Part 2
C: From inside the assembly measure 1-1/4" down from the top of (2422) Lower Back then place 2 (1858)
Short Wall Supports over the pilot holes of the (2413) CE Siding then attach to (2422) Lower Back and (2558)
Ground Back with 4 (S1) #8 x 1-1/8" Wood Screws per board. (fig. 25.3 and 25.4)
D: From outside of the assembly attach (1858) Short Wall Supports to each (2413) CE Siding with 2 (S0) #8 x
7/8" Truss Screws per siding. (fig. 25.5)
Fig. 25.3
Wood Parts
2 x Short Wall Support 1 x 4 x 24-1/4"
1858
Fig. 25.5
2413
8 x
12 x
Fig. 25.4
S1
x 4 per
board
1858
1858 (hidden)
Hardware
#8 x 1-1/8" Wood Screw
S1
#8 x 7/8" Truss Screw
S0
51
2422
Inside View
S0
x 2 per board
Outside View
1-1/4"
2413
2558