KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 39

Step 17: Roof Frame Assembly
Part 3
E: On the Cafe Wall and Access Wall sides place 1 (0348) SL Ground tight to top of each (2384) Post Support
and (2557) MK Support and flush to the outside edges of each (2364) Block. Attach to each (2364) Block with 4
(H2) 1/4 x 2" Hex Bolts (with lock washer, flat washer and t-nut) per board. (fig. 17.5 and 17.6)
F: On the Front Wall and Swing Wall sides place 1 (2391) Top Front Back flush to the top and outside edge of
each (2364) Block. Attach to each (2364) Block with 2 (H4) 1/4 x 4" Hex Bolts (with lock washer, flat washer and
t-nut) in the top holes and 2 (S2) #8 x 1-1/2" Wood Screws in the bottom holes, per board. (fig. 17.5 and 17.6)
Fig. 17.6
H2
0348
H2
H4
2384
Wood Parts
2 x Top Front Back 1 x 5 x 46-5/8"
2391
2 x SL Ground 1 x 5 x 38-1/4"
0348
1/4" lock
washer
1/4" flat
washer
2384
2364
2391
4 x
8 x
4 x
Fig. 17.5
H4
2391
1/4"
t-nut
2364
H4
S2
x 2 per
(2391)
Hardware
#8 x 1-1/2" Wood Screw
S2
1/4 x 2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H2
1/4 x 4" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H4
39
Front Wall
Cafe Wall
Swing Wall
2364
0348
2364
H2
2557
Access Wall
H4
H2
2557