KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 44

Step 21: Attach Hand Grip
Pre-drill all holes using a 3/16" drill bit before installing the Lag Screws
A: On the Front Wall measure 1-1/2" up (2383) Post from the top of (2350) Front Floor on the Access Wall
side then attach 1 Hand Grip with 2 (LS1) 1/4 x 1-1/2" Lag Screws (with flat washer). (fig. 21.1 and 21.2)
Fig. 21.2
LS1
2371
1/4" flat
washer
1/4" flat
washer
2 x
LS1
Fig. 21.1
2383
Hand Grip
2350
Hardware
1/4 x 1-1/2" Lag Screw (1/4" flat washer)
44
Access Wall
Front Wall
1-1/2"
Other Parts
1 x Hand Grip