KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 28

Step 10: Connect Monkey Bar Assemblies
Note: Pre-drill all holes using a 1/8" drill bit before installing the Pan Screws.
A: Using a Monkey Bracket connect both (1565) MK Rail Shorts to each (2382) MK Post with 1 (G10) 5/16 x
3" Hex Bolt (with lock washer, flat washer and t-nut) and Monkey Bracket to the rails using 2 (S6) #12 x 1" Pan
Screws per rail as shown in fig. 10.1 and 10.2. Be sure to attach the correct end, using the 1-1/4" measurement
shown in fig. 10.2 as your guide.
B: Attach Monkey Bracket to both (2382) MK Posts with 2 (S6) #12 x 1" Pan Screws per bracket. (fig. 10.2)
Fig. 10.1
G10
S6
2382
1565
Hardware
2 x 5/16 x 3" Hex Bolt
G10
(5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
8 x #12 x 1" Pan Screw
S6
1565
5/16"
T-Nut
28
Fig. 10.2
1-1/4"
G10
5/16" Lock
S6
Washer
x 4
2382
Other Parts
2 x Monkey Bracket
Monkey
Bracket
5/16" Flat
Washer