KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 38

Step 17: Roof Frame Assembly
Part 2
C: On the Access Wall place 1 (2557) MK Support tight to top of (2553) MK Board at each (2383) Post. Each
(2557) MK Support must be flush to the inside edge of the posts. Attach each (2553) MK Support to posts with
1 (H2) 1/4 x 2" Hex Bolt (with lock washer, flat washer and t-nut) and 3 (S2) #8 x 1-1/2" Wood Screws per board.
(fig. 17.3 and 17.4)
D: Tight to the top and flush to the inside edge of each (2383) Post attach 1 (2364) Block to each (2553) MK
Support with 4 (S2) #8 x 1-1/2" Wood Screws per board. Notice the hole orientation on each board. (fig. 17.3
and 17.4)
Fig. 17.3
Access Wall
Wood Parts
2 x Block 2 x 4 x 13"
2364
2 x MK Support 1 x 4 x 16-3/4"
2557
Cafe Wall
S2
x 7
1/4" flat
washer
1/4" lock
washer
H2
Flush and
Tight
2383
Hardware
14 x
S2
2 x
H2
Notice hole orientation
2364
Flush and
Tight
S2
x 7
2553
#8 x 1-1/2" Wood Screw
1/4 x 2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
38
2364
1/4"
t-nut
2557
H2
Fig. 17.4
2383
2557