KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 25

Step 7: Roof Assembly
Part 2
C: Starting at the top of the Roof Support Assembly attach 1 (2421) Cedar Roofing on each side of the Roof
Support Assemblies with 3 (S0) #8 x 7/8" Truss Screws per board. (fig. 7.2) Be sure to overlap the top of the
boards so there are no gaps. (fig. 7.2 and 7.3)
D: Drill a hole 1-1/2" up from the bottom of the 2 bottom (2421) Cedar Roofing (for bottom row only). Attach 1
(2421) Cedar Roofing at the bottom of the Roof Support Assembly on each side, making sure they are flush to
each (2394) Roof Support with 3 (S0) #8 x 7/8" Truss Screws per board. (fig. 7.2 and 7.4)
E: On one side of the assembly evenly space and attach 8 (2421) Cedar Roofing, leaving no gaps, with 3 (S0) #8
x 7/8" Truss Screws per board. There should be 10 (2421) Cedar Roofing on this side. (fig. 7.2)
F: On the other side of the assembly evenly space and attach 8 (2421) Cedar Roofing, leaving no gaps, with 3
(S0) #8 x 7/8" Truss Screws per board. (fig. 7.2)
Fig. 7.3
S0
Overlap cedar roofing
Wood Parts
20 x Cedar Roofing 3/8 x 3-1/2 x49-1/2"
2421
Fig. 7.2
S0
x 60
2394
2421
Roof Supports
removed for clarity
1-1/2"
Hardware
60 x #8 x 7/8" Truss Screw
S0
25
2421 x 20
2417
(hidden)
1-1/2"
Fig. 7.4
Flush to edge