KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 69

Step 33: Connect Monkey Bar Assembly to Fort
Part 1
A: Attach 2 MB Hanger Brackets to (2553) MK Board with 2 (PB2) 1/4 x 1-1/4" Pan Bolt (with lock washer, flat
washer and t-nut) per bracket as shown in fig. 33.1 and 33.2.
B: Place each (1565) MK Rail Short of the Monkey Bar Assembly from Step 10 in each MB Hanger Bracket and
attach with 1 (PB5) 1/4 x 2" Pan Bolt (with flat washer x 2 and lock nut) per bracket. (fig. 33.3)
C: From inside the assembly attach (2553) MK Board to each (1565) MK Rail Short with 2 (S4) #8 x 3" Wood
Screws per rail. (fig. 33.3)
Fig. 33.1
Fig. 33.3
PB5
1565
Fig. 33.2
2553
PB2
2553
S4
1/4" Flat
Washer
Hardware
4 x 1/4 x 1-1/4" Pan Bolt
PB2
(1/4" lock washer, 1/4" flat washer & 1/4" t-nut)
2 x 1/4 x 2" Pan Bolt
PB5
(1/4" flat washer x 2 & 1/4" lock nut)
4 x #8 x 3" Wood Screw
S4
69
PB2
1/4"
Lock Nut
S4
MB Hanger
Bracket
1/4"
T- Nut
1/4" Flat
1/4" Lock
Washer
Washer
PB5
Other Parts
2 x MB Hanger Bracket