KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 26

Step 8: Monkey Rail Assembly
Pre-drill all pilot holes using a 1/8" drill bit before installing Wood Screws.
A: Insert 3 (578) 1-1/8 x 15-7/8" Dowels into both (1565) MK Rail Shorts as shown in fig. 8.1. Note the pilot holes in
one of the (1565) MK Rail Short are on the bottom of the board.
Fig. 8.1
1-1/4"
B: Make sure shoulder of dowel is against
each rail before pre-drilling pilot holes. Drill
1/8" pilot holes through the rails and into the
dowels to prevent splitting. (fig. 8.2)
Fig. 8.3
S3
C: Attach (578) 1-1/8 x 15-7/8" Dowels to both rails with 2 (S3) #8 x 2-1/2" Wood Screws per dowel. (fig. 8.3)
Wood Parts
3 x Tennon Dowel 1-1/8 x 15-7/8"
578
2 x MK Rail Short 2 x 4 x 50"
1565
1565
Note: Pilot holes at
bottom of this rail
1-1/4"
6 x
S3
1"
1565
Fig. 8.2
Hardware
#8 x 2-1/2" Wood Screw
26
1"
578
1565
1565