KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 34

Step 15: Floor Assembly
Part 1
A: 5/8" down from the top of both (2371) Floor Ends attach (0790) Floor Joist with 2 (S4) #8 x 3" Wood Screws
per end. (fig. 15.1 and 15.2)
B: On the Swing Wall attach (0795) Side Joist to the inside of (2370) Floor Back with 2 (H3) 1/4 x 2-1/2" Hex
Bolts (with lock washer, flat washer and t-nut) and 2 (S7) #12 x 2" Pan Screws from outside the assembly, as
shown in fig. 15.1.
C: On the Front Wall, on the Access Wall side, place (2375) Long Joist on the inside of (2350) Front Floor
and attach to (2350) Front Floor with 2 (H3) 1/4 x 2-1/2" Hex Bolts (with lock washer, flat washer and t-nut) as
shown in fig. 15.1.
D: On the Front Wall, on the Cafe Wall side place (2386) Short Joist on the inside of (2350) Front Floor and
attach with 2 (H3) 1/4 x 2-1/2" Hex Bolts (with lock washer, flat washer and t-nut) from outside the assembly.
(fig. 15.1)
E: Tighten all bolts.
Swing Wall
Fig. 15.1
H3
S4
2371
Access Wall
Wood Parts
1 x Floor Joist 5/4 x 4 x 46-1/2"
0790
1 x Side Joist 2 x 2 x 43"
0795
1 x Long Joist 2 x 2 x 29-3/4"
2375
1 x Short Joist 2 x 2 x 11-1/2"
2386
H3
S7
H3
1/4" lock
washer
1/4"
t-nut
1/4" flat
washer
2350
2370
Cafe Wall
0790
0795
S4
2386
Front Wall
Hardware
4 x #8 x 3" Wood Screw
S4
2 x #12 x 2" Pan Screw
S7
6 x H3 1/4 x 2-1/2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
34
Fig. 15.2
0790
2371
Side View
H3
2375
5/8"
S4
2371