KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 42

Step 19: Attach Gable to Roof
A: Along each (2394) Roof Support measure 8" up from the top of (2420) Bottom Gables then tight to the
underside of the Roof, on each Roof Support Assembly, attach 2 (2419) Gable Sides, at the measured spot, to
(2394) Roof Supports and (2420) Bottom Gable with 2 (S2) #8 x 1-1/2" Wood Screws per board. (fig. 19.1)
B: Tight to the underside of the Roof, at the peak of each Roof Support Assembly, attach 1 (2418) Gable Top to
the (2394) Roof Supports with 4 (S2) #8 x 1-1/2" Wood Screws per board. (fig. 19.1)
Repeat for opposite side.
Fig. 19.1
2419
Wood Parts
2 x Gable Top 1 x 6 x 19"
2418
4 x Gable Side 1 x 4 x 13-23/32"
2419
Inside View
2420
Notice board orientation.
16 x
2418
2394
S2
x 16
Hardware
#8 x 1-1/2" Wood Screw
S2
42
8"