KidKraft CRANBROOK PLAY SYSTEM Installation And Operating Instructions Manual page 72

Step 35: Glider Assembly
A: Attach 1 Glider End to the Glider Seat using 1 (Z) 5/16 x 6" Hex Bolt (with 2 flat washers and 1 lock nut).
Repeat for the second Glider End. (fig. 35.1)
B: Install 2 Glider Rope with Chains into each Glider End using 2 - 5/16" Flat Washers and 1 Lock Nut per rope.
(fig. 35.1)
WARNING:
exceed 1/2 thread past the nut
Fig. 35.1
5/16 Flat
Washer-Zinc
5/16 Lock
Nut
5/16 x 6" Hex
Bolt
Glider Seat
Bolt must not
Hardware
2 x 5/16 x 6" Hex Bolt
Z
(5/16" flat washer x 2, 5/16" lock nut)
8 x 5/16" Flat Washer
4 x 5/16" Lock Nut
Glider Rope
and Chain
Glider End
72
5/16 Flat
Washer-Zinc
5/16 Lock
Nut
5/16 Flat
Washers
5/16 Lock
Nuts
Other Parts
2 x Glider Ends
1 x Glider Seat
1 x Glider Rope and Chain (pkg of 4)