Snapper NX100 Operator's Manual page 8

Safety and Operation Decals
Reading this manual and the safety instructions it contains
will provide the basic knowledge necessary to operate this
mower safely and effectively. However, several safety and
operation decals have also been placed on the mower as a
reminder of this important information during operation.
The decals noted below are located on the mower. The safety
warnings and operation instructions they contain should be
carefully read, understood, and followed. Not following these
important warnings and instructions can result in serious
bodily injury or death.
If any of these decals are lost or damaged, replace them
immediately. Contact your dealer for replacement decals.
Compare Figure 1 with the table following.
A,
B,
C, D
E
8
F
G
Part No. 7101084
A. WARNING To
avoid serious injury
or death, read the
operator's manual
before attempting to
operate the mower.
B. WARNING
Amputation Hazard.
To avoid serious
injury or death, keep
hands and feet away
from the mower deck
at all times during
operation.
C. WARNING Thrown
Objects Hazard. To
avoid injury from
thrown objects, do not
operate the mower
unless all mulching,
discharge, or bagging
components are in
their proper place.
D. WARNING Thrown
Objects Hazard. To
avoid injury to others,
do not mow when
others, especially
children, are around.
Part No. 7075471
Ground Speed Control
• Move ground
speed control
toward Fast
(Rabbit) to
increase ground
speed.
• Move ground
speed control
toward Slow
(Turtle) to
decrease ground
speed.
Part No. 7029782
OPC (Blade Control)
• Squeeze blade
control to start
and run engine
and blade.
• Release blade
control to stop
engine and
blade.
Part No. 7028407
Drive Control
• Squeeze drive
control against
handle to engage
wheel drive.
www.snapper.com