Table of Contents
Advertisement
Quick Links
Safety Instructions & Operator's Manual for
21" VARIABLE SPEED
REAR DISCHARGE
WALK BEHIND
MOWERS
Models
SPVH21675 (7800441)
NSPVH21675 (7800449)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to 'Engine Power Rating Information' for
further details.
Manual No. 7102869 (Rev. '-', 10/22/2008)
TP10009165
Advertisement
Table of Contents
Related Manuals for Snapper NSPVH21675
Summary of Contents for Snapper NSPVH21675
- Page 1 Models SPVH21675 (7800441) NSPVH21675 (7800449) NOTE: Specifications are correct at time of printing and are subject to change without notice. * Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating Information’ for further details.
- Page 2 Thank You for purchasing this quality-built Snapper mower. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper mower will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them.
-
Page 3: Table Of Contents
Table of Contents Operator Safety ..........2 Important Operator Safety Instructions . -
Page 4: Operator Safety
IMPORTANT OPERATOR SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. - Page 5 IMPORTANT OPERATOR SAFETY INSTRUCTIONS (Continued) SAFE HANDLING OF GASOLINE OPERATION (Continued From Previous Page) (Continued From Previous Column) 7. Remove gas-powered equipment from the vehicle or 14. DO NOT discharge material against a wall or trailer and refuel it on the ground. If this is not possible, obstruction.
-
Page 6: Features And Controls
IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. Features and Controls Oil Fill Cap and Dipstick Rope Start Handle Fuel Filler Cap Drive Handle Recycling Cover Drive Handle Lock Lever... -
Page 7: Operation
Pre-Start Check List Starting and Operation Make the following checks and perform the service required Engine and Blade before each start-up. 1. Make sure the drive handle (A, Figure 3) is pulled fully 1. Check the guards, deflectors, grass bag, and covers to back, and the drive handle lock lever (B) is pushed fully make sure all are in place and securely tightened. -
Page 8: Propelling Mower
Starting and Operation (Continued) Handle Height Adjustment Propelling the Mower The height of the mower handle can be adjusted as follows: 1. Remove the handle knobs, washers and carriage bolts 1. Start the engine. Refer to the Section entitled “Starting from the lower handle (A, Figure 5). -
Page 9: Cutting Height Adjustment
WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 1.50 in 4.00 in Cutting Height Adjustment... -
Page 10: Installing The Discharge Deflector
Installing the Grass Bag WARNING 1. Raise the rear discharge door (A, Figure 11). DO NOT attempt any maintenance, adjustments or service 2. Remove the recycling plug. Refer to the section entitled with engine and blade running. STOP engine and blade. “Removing the Recycling Plug”. -
Page 11: Maintenance
Maintenance - Introduction Check Mower Blade 1. Disconnect the spark plug wire and secure the end away To retain the quality of the mower, use genuine SNAPPER from the plug. replacement parts only. Contact a local SNAPPER dealer for 2. Tilt the mower up on its rear wheels for access to the parts and service assistance. -
Page 12: Wheel Drive Components
WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. -
Page 13: Mower Blade Replacement
3. Remove the blade (B, Figure 16). WARNING DO NOT attempt any maintenance, adjustments or service Make sure that with engine and blade running. STOP engine and blade. blade hub is seated Disconnect spark plug wire and secure away from spark between flanges plug. -
Page 14: Wheel Drive Control Adjustment
3. Push the drive lever fully forward, and measure the WARNING length of the extended spring. The overall spring length DO NOT attempt any maintenance, adjustments or service should increase by 0.020 – 0.025”. with engine and blade running. STOP engine and blade. 4. -
Page 15: Belt Service
Engine Drive Belt Replacement WARNING 1. Empty the fuel tank. DO NOT attempt any maintenance, adjustments or service 2. Remove the blade (A, Figure 21). Refer to the Section with engine and blade running. STOP engine and blade. entitled “Blade Sharpening”. Disconnect spark plug wire and secure away from spark 3. -
Page 16: Rear Cover Removal & Installation
WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Rear Cover Removal and Installation To Remove the Rear Cover 1. -
Page 17: Service Schedule
Service Schedule ITEM SERVICE REF. EACH EACH PERFORMED SEASON Engine Oil Check Oil Level Page 5 Initial Oil Change Page 9 Periodic Oil Change Page 9 Air Pre-Cleaner Clean Sponge Element Engine Manual Air Cleaner Clean or Replace Engine Manual Spark Plug Replace Engine Manual... -
Page 18: Troubleshooting
Troubleshooting PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill fuel tank with fresh fuel. Using Recoil Starter 2. Engine needs priming. 2. Prime. Check Engine Manual for Instructions. 3. Spark plug wire disconnected. 3. -
Page 19: Warranty
2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the original purchaser’s residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both. - Page 20 Notes www.snapper.com...
-
Page 21: Slope Guide
Slope Guide... - Page 22 Notes www.snapper.com...
- Page 23 Notes...
- Page 24 21” VARIABLE SPEED REAR DISCHARGE WALK BEHIND MOWERS Product Specifications (All) Common Service Parts Part Number Blade Control Cable 7102648 Deck Size (in) Height of Cut (in) 1.25 - 4 Wheel Drive Control Cable 7102647 Transmission Type Variable Speed/Gear Cutter Blade (Double Wave) 7100242 Ground Speed (mph) 0 - 4.2...
Need help?
Do you have a question about the NSPVH21675 and is the answer not in the manual?
Questions and answers