Mercedes-Benz EQC Owner's Manual page 549

546 Display messages and warning/indicator lamps
Display messages
h
Wheel sensor(s) missing
h
Check tyre(s)
Possible causes/consequences and
* There is no signal from the tyre pressure sensor of one or more wheels. No pressure value is displayed for the
affected tyre.
Have the faulty tyre pressure sensor replaced at a qualified specialist workshop.
#
* The tyre pressure in one or more tyres has dropped significantly. The wheel position is displayed.
& WARNING Risk of an accident due to insufficient tyre pressure
Tyres with insufficient tyre pressure pose the following risks:
The tyres may burst, especially as the load and vehicle speed increase.
R
The tyres may wear excessively and/or unevenly, which may greatly impair tyre traction.
R
‑ The driving characteristics, steering and braking may be greatly impaired.
R
You could then lose control of the vehicle.
Observe the recommended tyre pressures.
#
Adjust the tyre pressure if necessary.
#
Stop the vehicle in accordance with the traffic conditions.
#
Check the tyre pressure (
#
M M Solutions
page 491) and the tyres.
/