Mercedes-Benz EQC Owner's Manual page 533

530 Display messages and warning/indicator lamps
Display messages
6
Front left malfunction Con-
sult workshop (example)
Possible causes/consequences and
Recognition of a restraint system fault:
The restraint system warning lamp 6 does not light up when the ignition is switched on.
R
The restraint system warning lamp 6 lights up continuously or repeatedly during a journey.
R
Consult a qualified specialist workshop immediately.
#
* The corresponding restraint system is faulty (
& DANGER Risk of fatal injuries due to the restraint system malfunctioning
If the restraint system is malfunctioning, restraint system components may be triggered unintentionally or may
not deploy as intended during an accident. This may affect the seat belt tensioner or airbag, for example. Fur‐
thermore, in the event of an accident, the high-voltage on-board electrical system may not be deactivated as
intended.
You may be electrocuted if you touch the damaged component parts of the high-voltage on-board electrical sys‐
tem.
Have the restraint system checked and repaired immediately at a qualified specialist workshop.
#
After an accident, switch off the ignition immediately.
#
Recognition of a restraint system fault:
The restraint system warning lamp 6 does not light up when the ignition is switched on.
R
The restraint system warning lamp 6 lights up continuously or repeatedly during a journey.
R
Consult a qualified specialist workshop immediately.
#
M M Solutions
page 31).
/