Mercedes-Benz EQC Owner's Manual page 139

136 Light and sight
High beam
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the main beam is activated, the indica‐
tor lamp for dipped beam L is deactiva‐
ted and replaced by the indicator lamp for
the main beam K.
To switch off: move the combination switch
#
back to its starting position.
Headlamp flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal indicators
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal indicator will
flash three times.
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2
Vehicles with Active Lane Change Assist:
Indicator operation activated by the driver
R
can extend for the duration of the lane
change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Activating/deactivating the hazard warning
lamps
or 4.
Press button 1.
#
The hazard warning lamps will switch on auto‐
matically if:
the airbag has been deployed.
R
the vehicle is heavily braked from a speed of
R
more than 70 km/h to a standstill.