Mercedes-Benz EQC Owner's Manual page 380

Displaying hazard warnings
Multimedia system:
© Navigation (Navigation)
4 5
If hazard warnings are available these can be
shown as symbols on the map. The display
depends on the settings for the
fic incidents options.
Set the options ( page 375).
/
#
The following displays are available:
Show all symbols
R
The Traffic and Traffic incidents
switched on.
Only show symbols on the expected route
R
The Traffic option is switched off, the
incidents option is switched on.
Show no symbols
R
The Traffic incidents option is switched off.
The following hazard warnings are shown on the
map:
Broken-down vehicles
R
Accidents
R
Hazardous weather
R
General hazards
R
Hazard warning lights, when switched on
R
Crosswind warning
R
Mobile roadworks
R
Traffic and Traf-
The display is not available in all countries
and regions.
In the Federal Republic of Germany the dis‐
play is currently available in the Federal State
of Hesse.
options are
% If the vehicle is approaching a hazard spot
with a vehicle speed of at least 60 km/h, the
voice output "Traffic incident ahead" is
issued.
Traffic
The voice output is not issued for hazardous
weather.
Sending hazard warnings
Automatically detected hazard warnings are sent
by the vehicle.
To send a hazard warning yourself: tap on
#
the media display when the map is shown.
The navigation menu is shown.
MBUX multimedia system 377
Select ¡.
#
Select Report traffic incident.
#
A prompt is shown.
Select Yes.
#
The Thank you for supporting accident pre-
vention. message appears.
Route guidance with augmented reality
Overview of route guidance with augmented
reality
& WARNING Risk of accident and injury
caused by distraction, incorrect image or
interpretation of the display
The distance to other road users or informa‐
tion, such as traffic lights, can be incorrectly
assessed from the camera image. The cam‐
era image of the augmented reality display is
not suitable to be used for driving.
Always keep your eyes on the actual
#
traffic situation. Only glance briefly at
the camera image.