Mercedes-Benz EQC Owner's Manual page 184

Extension cables
R
Extension reels
R
Multiple sockets
R
Never use socket adapters to connect
#
the charging cable to the mains socket.
The only exception being if the adapter
has been tested and approved by the
manufacturer for charging the high-volt‐
age battery of an electric vehicle.
Observe the safety notes in the operat‐
#
ing instructions for the socket adapter.
Only the following charging cables may be used:
The charging cable supplied with the vehicle.
R
A charging cable that has been approved for
R
the vehicle.
The charging process can vary depending on the
power supply equipment.
Shorter charging times can be achieved in the
following ways:
Charging at a wallbox.
R
Charging at a charging station.
R
When doing so, always observe the local infor‐
mation.
Do not leave the charging cable controls hanging
loose from a mains socket.
Do not lift the controls by the following compo‐
nent parts:
The charging cable connector.
R
The mains plug.
R
The charging cable should be stowed and held in
place in the bag provided in the boot of the vehi‐
cle.
Overview of the charging cable control panel
The charging cable control panel shows the cur‐
rent status of the charging process.
Driving and parking 181
1 POWER: supply voltage indicator
2 CHARGING: charging process indicator
3 TEMPERATURE: temperature control indica‐
tor
4 FAULT: protection and control system indica‐
tor
POWER
Meaning
1 1 Supply voltage
indicator
Lights up white The supply voltage is
connected.