Table of Contents
Advertisement
Partitioning net with load compartment enlarge‐
ment
Extend and unfold the partitioning net.
#
The joints on the top and bottom guide rods
will audibly engage.
To attach: attach the guide rod
#
roof lining to the holders 2.
Engage the hooks
#
4
on the left and right.
Pull on the loose ends of the lashing straps
#
until the partitioning net is tight.
After driving a short distance, check the ten‐
#
sion of the partitioning net and re-tension it if
necessary.
1
on the
3
in the tie-down eyes
Seats and stowing 121
To remove: pull the belt clamp
#
until the lashing straps are loose.
Remove the hooks
3
from the tie-down
#
eyes
4
on the left and right.
Remove the guide rod
1
from the holders
#
2.
To stow: press the red buttons on the top
#
and bottom guide rods.
Collapse and roll up the partition net.
#
Overview of the tie-down eyes
Observe the notes on loading the vehicle
(
page 113).
/
5
upwards
Hide quick links:
Advertisement
Table of Contents
