Dynamic Select Switch - Mercedes-Benz EQC Owner's Manual

The system may be impaired or may not function
in the following situations:
If visibility is poor, e.g. due to insufficient illu‐
R
mination of the road, highly variable shade
conditions, rain, snow, fog or heavy spray.
If there is glare, e.g. from oncoming traffic,
R
direct sunlight or reflections.
if there is dirt on the windscreen in the vicin‐
R
ity of the multifunction camera or the camera
is misted up, damaged or obscured.
If traffic signs are hard to discern, e.g. due to
R
dirt, snow or insufficient lighting, or because
they are obscured.
If the information on the navigation system's
R
digital map is incorrect or out of date.
If the signs are ambiguous, e.g. traffic signs
R
in roadworks or in adjacent lanes.
Displaying ECO Assist
On-board computer:
Assistance
4
The assistant display will be shown.
#
Operation of the haptic accelerator pedal
In drive programs ; and Í, the haptic
accelerator pedal features an additional pres‐
sure point to help you drive as efficiently as pos‐
sible.

DYNAMIC SELECT switch

Function of the DYNAMIC SELECT switch
% The availability of the Í drive program is
country-dependent.
Driving and parking 169
Use the DYNAMIC SELECT switch to change
between the following drive programs:
= (Individual)
C (Sport)
A (Comfort)
; (Eco)
Í (MaxRange)
Depending on the drive program selected, the
following vehicle characteristics will change:
drive
R
suspension
R
steering
R
®
ESP
R
pressure point in the haptic accelerator
R
pedal