Mercedes-Benz EQC Owner's Manual page 191

188 Driving and parking
Press "cancel charging" button 3.
#
or
Unlock the vehicle (only charging with alter‐
#
nating current mode 2/3).
The charging process is ended. The %
indicator lamp 1 lights up white. The vehi‐
cle socket is unlocked.
Press and hold button 2 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con‐
nector, repeat the unlocking procedure. If
the charging cable connector is still blocked,
contact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi‐
cle charging cable safely in the vehicle.
Combo 2 vehicle socket
Press "cancel charging" button 2.
#
or
Unlock the vehicle (only charging with alter‐
#
nating current mode 2/3).
The charging process is ended. The %
indicator lamp 1 lights up white. The vehi‐
cle socket is unlocked.
AC charging mode 2/3: remove the charg‐
#
ing cable connector from the vehicle socket
within 30 seconds.
After the 30 seconds have elapsed, the vehi‐
cle socket will be locked again and the charg‐
ing process will resume.
% If you cannot remove the charging cable con‐
nector, repeat the unlocking procedure. If
the charging cable connector is still blocked,
contact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi‐
cle charging cable safely in the vehicle.
% After the charging cable connector has been
disconnected, the left % indicator lamp
1 on the vehicle socket remains lit for
some time before switching off.