Table of Contents
Advertisement
186 Driving and parking
Combo 1 vehicle socket
Combo 2 vehicle socket
Press socket flap 1.
#
Socket flap
1
swings open.
The % indicator lamp
2
play
3
light up white.
%
When the drive system is started (the õ
display is lit in the multifunction display),
socket flap
1
cannot be opened.
Press catch
#
Socket cover
%
Only vehicle socket connection
required for charging process mode 2/3. In
this case, only open the upper part of socket
flap 5.
To charge at a mains socket (mode 2):
#
insert the mains plug into the mains socket
of the external power source to the stop.
Set the maximum charging current if
#
required.
Insert the charging cable connector into vehi‐
#
cle socket connection
socket connection
should remain covered by the lower part of
socket flap 5.
Make sure that the charging cable is not taut
when inserted.
The # indicator lamp
and status dis‐
play
3
soon as the high-voltage battery is being
charged.
7
to the left.
5
is open.
8
is
8
to the stop. Vehicle
6
remains free and
4
and status dis‐
first flash orange and then green as
Hide quick links:
Advertisement
Table of Contents
