Mercedes-Benz EQC Owner's Manual page 541

538 Display messages and warning/indicator lamps
Display messages
Blind Spot Assist inopera-
tive
Blind Spot Assist not availa-
ble when towing a trailer
See Owner's Manual
Active Blind Spot Assist
currently unavailable See
Owner's Manual
Possible causes/consequences and
Drive on.
#
Once the cause of the problem is no longer present, the system will be available again.
or
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart
#
the drive system.
If necessary, clean the rear bumper. If the bumper is especially dirty, the sensors in the bumper may be mal‐
#
functioning.
* Blind Spot Assist is malfunctioning.
Consult a qualified specialist workshop.
#
* When you establish the electrical connection to the trailer, Blind Spot Assist is unavailable.
Press the left-hand Touch Control and acknowledge the display message.
#
* Active Blind Spot Assist is temporarily unavailable.
The system limits have been reached (
Drive on.
#
Once the cause of the problem is no longer present, the system will be available again.
or
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart
#
the drive system.
M M Solutions
page 250).
/