Mercedes-Benz EQC Owner's Manual page 505

502 Wheels and tyres
Protect the tyres from contact with oil,
R
grease or fuel.
Overview of the tyre-change tool kit
Apart from some country-specific variants, vehi‐
cles are not equipped with a tyre-change tool kit.
For more information on which tyre-changing
tool kits are required and approved for perform‐
ing a wheel change on your vehicle, consult a
qualified specialist workshop.
You require the following tools, for instance, to
change a wheel:
Jack
R
Chock
R
Wheel wrench
R
Centring pin
R
% The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
The tyre-change tool kit is located under the load
compartment floor.
1 Jack
2 Ratchet for jack
3 Folding chock
4 Wheel wrench
5 Centring pin
6 Socket wrench for ratchet
Setting up the folding chock
Preparing the vehicle for a wheel change
Requirements:
The required tyre-change tool kit is available.
R
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.