Mercedes-Benz EQC Owner's Manual page 521

518 Technical data
Mounting dimensions of the trailer hitch
1 Fastening points
2 Overhang dimension
3 Rear axle centre line
The overhang dimension and fastening points
are valid for a trailer hitch installed at the fac‐
tory.
Missing values were not available at the time of
going to press.
Model
EQC 400 4MATIC
Permissible trailer load
The tongue weight is not included in the towing
capacity.
Permissible trailer loads
EQC 400 4MATIC
Braked (at a minimum start-
off gradeability of 8%)
Braked (at a minimum start-
2 2 Over‐
off gradeability of 12%)
hang dimen‐
sion
Unbraked
Maximum tongue weight
* NOTE Damage caused by the trailer
coming loose
If the tongue weight used is too low, the
trailer may come loose.
The tongue weight must not be below
#
50 kg.
Use a tongue weight that is as close as
#
possible to the maximum permissible
tongue weight.
1800 kg
1800 kg
750 kg