How To Use Touch 10 - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

How to use Touch 10

The Touch 10 and its use are described in full detail in
the User guide for the video conferencing device.
Not all features are available on all products; therefore
the touch buttons shown here may or may not be
present on your device.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
Tap Share to start sharing content
and to conduct presentations.
Tap the device name or address
to access System Information,
Settings, Restart and Factory
reset. You can also activate Call
forwarding, Standby, and Do not
disturb modes.
Tap Call to make a
call, and to invoke the
Favorites, Directory and
Recents contact lists.
Tap Join Webex to join a
Webex meeting
Press and hold the
left side of the Volume
button to decrease the
loudspeaker volume and
the right side to increase
the volume.
Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
189
Administrator Guide
Device settings Appendices Appendices
Tap ? to contact Help desk or access other
facility services, if available.
Tap the Camera icon to activate
self-view and camera control.
Tap Messages
the voice mail system, if
Entry point for user interface
extensions (your device
may have zero or more such
buttons with different color,
text and icons).
Press the
button to mute and unmute
microphones.
Time of day.
to invoke
available.
Microphone