Roomreset Settings; Roomreset Control - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

RoomReset settings

RoomReset Control

This setting is for use with control systems or macros. Macros allow you to write snippets of
JavaScript code that can automate parts of your video conferencing device, thus creating
custom behavior.
When a room has been idle for some time the video conferencing device can send an event
to indicate that the room is ready to be reset.
The events that are sent when this setting is enabled are:
*e RoomReset SecondsToReset: 30
** end
*e RoomReset Reset
** end
Requires user role: ADMIN
Default value: On
Value space: CameraPositionsOnly/Off/On
CameraPositionsOnly: Not applicable.
Off: No RoomReset events will be sent.
On: The room reset control is enabled and RoomReset events will be sent.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
152
Administrator Guide
Device settings Device settings Appendices