Cisco TelePresence SX10 Quick Set
Introduction
SIP Turn DiscoverMode
Define the discover mode to enable/disable the application to search for available Turn
servers in DNS. Before making calls, the device will test if port allocation is possible.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Set to Off to disable discovery mode.
On: When set to On, the device will search for available Turn servers in DNS, and before
making calls the device will test if port allocation is possible.
SIP Turn DropRflx
DropRflx will make the device force media through the Turn relay, unless the remote device
is on the same network.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Disable DropRflx.
On: The device will force media through the Turn relay when the remote device is on
another network.
SIP Turn Server
Define the address of the TURN (Traversal Using Relay NAT) server. It is used as a media
relay fallback and it is also used to discover the device's own public IP address.
Requires user role: ADMIN
Default value: ""
Value space: String (0..255)
The preferred format is DNS SRV record (e.g. _turn._udp.<domain>), or it can be a valid
IPv4 or IPv6 address.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration
Peripherals
Maintenance
SIP Turn UserName
Define the username needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
A valid username.
SIP Turn Password
Define the password needed for accessing the TURN server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
A valid password.
SIP Type
Enables SIP extensions and special behavior for a vendor or provider.
Requires user role: ADMIN
Default value: Standard
Value space: Standard/Cisco
Standard: Use this when registering to standard SIP Proxy (tested with Cisco
TelePresence VCS).
Cisco: Use this when registering to Cisco Unified Communication Manager.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
161
Administrator Guide
Device settings
Device settings
Appendices
Need help?
Do you have a question about the TelePresence SX10 Quick Set and is the answer not in the manual?