Networkservices Ntp Server [N] Address; Networkservices Ntp Server [N] Key; Networkservices Ntp Server [N] Keyalgorithn; Networkservices Ntp Server [N] Keyid - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

NetworkServices NTP Server [n] Address

n: 1..3
The address of the NTP server that will be used when NetworkServices NTP Mode is set to
Manual, and when NetworkServices NTP Mode is set to Auto and no address is supplied by
a DHCP server.
Requires user role: ADMIN
Default value: "0.tandberg.pool.ntp.org"
Value space: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.

NetworkServices NTP Server [n] Key

n: 1..3
To make sure that the NTP information comes from a trusted source, the video conferencing
device must know the ID/key pair that the NTP source uses. Use the NetworkServices
NTP Server [n] Key and NetworkServices NTP Server [n] KeyId settings for the key and ID
respectively.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 2045)
The key, which is part of the ID/key pair that the NTP source uses.

NetworkServices NTP Server [n] KeyId

n: 1..3
To make sure that the NTP information comes from a trusted source, the video conferencing
device must know the ID/key pair that the NTP source uses. Use the NetworkServices
NTP Server [n] Key and NetworkServices NTP Server [n] KeyId settings for the key and ID
respectively.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 10)
The ID, which is part of the ID/key pair that the NTP source uses.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals Maintenance

NetworkServices NTP Server [n] KeyAlgorithn

n: 1..3
Choose the authentication hash function that the NTP server uses, and that the video
conferencing device must use to authenticate the time messages.
Requires user role: ADMIN
Default value: ""
Value space: None/SHA1/SHA256
None: The NTP server doesn't use a hash function.
SHA1: The NTP server uses the SHA-1 hash function.
SHA256: The NTP server uses the SHA-256 hash function (from the SHA-2 family of
hash functions).

NetworkServices SIP Mode

Define whether the device should be able to place and receive SIP calls or not.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the possibility to place and receive SIP calls.
On: Enable the possibility to place and receive SIP calls.

NetworkServices SNMP Mode

SNMP (Simple Network Management Protocol) is used by network management systems to
monitor and manage devices such as routers, servers, and switches, that are connected to
the IP network. SNMP exposes management data in the form of variables on the managed
devices, which describe the device status and configuration. These variables can then be
remotely queried, and sometimes set, by managing applications.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/ReadOnly/ReadWrite
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
139
Administrator Guide
Device settings Device settings Appendices