Cisco TelePresence SX10 Quick Set Administrator's Manual page 12

Cisco TelePresence SX10 Quick Set

Introduction Introduction
New features and improvements in CE9.7
Connect to xAPI over a WebSocket
(All products)
You can now connect to the xAPI over WebSocket. The
communication channel over WebSocket is open both
ways until it is explicitly closed. This means that the server
can send data to the client as soon as the new data is
available, and there is no need for re-authentication
for every request. This improves speed significantly
compared to HTTP.
Each message contains a complete JSON document and
nothing else. Many programming languages have good
library support for WebSocket and JSON-RPC.
WebSocket is not enabled by default. Note that
WebSocket is tied to HTTP and HTTP or HTTPS must be
enabled before you can use WebSocket.
► xAPI over WebSocket
For more information, see
Graphical sound mixer available on Audio
Console
(Codec Pro, MX700, MX800, Room 70 G2, Room 70D G2, SX80)
The Audio Console now has a graphical sound mixer.
It has 8 user-definable parametric equalizer settings. A
setting consists of up to 6 sections, each of which has
its own filter type, gain, center/crossover frequency and
Q value. Each section is shown with its own color and
the effect of altering any of the parameters immediately
becomes visible in the graph.
For more information, see the Customization guide for
CE9.7 at ► https://www.cisco.com/go/in-room-control-
docs
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
Ambient noise reporting
(Codec Plus, Codec Pro, Room 55, Room 55 Dual, Room 70, Room 70 G2,
Room Kit, Room Kit Mini)
The Room series devices can be configured to report the
stationary ambient noise level in the room. The reported
value is an A-weighted decibel value (dBA), which reflects
the response of the human ear. Based on reported noise,
facility management or a building manager can intervene
to troubleshoot the issue.
All signal processing related to this feature is local and the
only data transmitted is the calculated noise level.
Support for multiple SRG-120DH/PTZ-12
cameras
(Codec Plus)
You can now connect up to three SRG-120DH/PTZ-12
guide.
cameras to a Codec Plus using an HDMI and an Ethernet
switch.
Other updates
• 1080p support for Room Kit Mini when it is used as a
USB camera.
(Room Kit Mini)
• You can turn video off and on during calls.
• A system administrator can prevent the use of HTTP
and only allow HTTPS Post and HTTPS Put requests.
(All products)
Maintenance
(All products)
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
12
Administrator Guide
Device settings Appendices