Add A Sign In Banner - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Add a sign in banner

Sign in to the web interface and navigate
to Security > Sign In Banner.
1. Enter the message that you want to
present to the user when he signs in.
2. Click Save to activate the banner.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
55
Administrator Guide
Device settings Appendices
About sign in banner
If a device administrator wants to provide
initial information to all users, he can
create a sign in banner. The message is
shown when the user signs in to the web
interface or the command line interface.
The maximum size is: 4 kByte
Welcome banner versus sign in
banner
Sign in banner:
• The banner is shown before the user
signs in to the web interface or the
command line interface.
Welcome banner:
• The banner is shown after the user
has signed in to the web interface or
the command line interface.