Network [N] Ipv6 Address; Network [N] Ipv6 Dhcpoptions; Network [N] Ipv6 Gateway; Network [N] Mtu - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Network [n] IPv6 Address

n: 1..1
Define the static IPv6 network address for the device. Applicable only when the Network
IPv6 Assignment is set to Static.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv6 address including a network mask. Example: 2001:DB8::/48

Network [n] IPv6 Gateway

n: 1..1
Define the IPv6 network gateway address. This setting is only applicable when the Network
IPv6 Assignment is set to Static.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv6 address.

Network [n] IPv6 DHCPOptions

n: 1..1
Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a
DHCPv6 server.
Requires user role: ADMIN, USER
Default value: On
Value space: Off/On
Off: Disable the retrieval of DHCP options from a DHCPv6 server.
On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals Maintenance

Network [n] MTU

n: 1..1
Define the Ethernet MTU (Maximum Transmission Unit) size. The MTU size must be
supported by your network infrastructure. The minimum size is 576 for IPv4 and 1280 for
IPv6.
Requires user role: ADMIN, USER
Default value: 1500
Value space: Integer (576..1500)
Set a value for the MTU (bytes).

Network [n] QoS Mode

n: 1..1
The QoS (Quality of Service) is a method which handles the priority of audio, video and
other data in the network. The QoS settings must be supported by the infrastructure.
Diffserv (Differentiated Services) is a networking architecture that specifies a simple,
scalable and coarse-grained mechanism for classifying and managing network traffic. It
provides QoS priorities on IP networks.
Requires user role: ADMIN, USER
Default value: Diffserv
Value space: Off/Diffserv
Off: No QoS method is used.
Diffserv: The Network QoS Diffserv Audio, Network QoS Diffserv Video, Network QoS
Diffserv Data, Network QoS Diffserv Signalling, Network QoS Diffserv ICMPv6 and
Network QoS Diffserv NTP settings are used to prioritize packets.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
132
Administrator Guide
Device settings Device settings Appendices