Cisco TelePresence SX10 Quick Set
Introduction
Cameras Camera [n] Focus Mode
n: 1..1
Define the camera focus mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/AutoLimited/Manual
Auto: The camera will do single shot auto focusing once a call is connected, as well as
after pan, tilt, zoom have changed.
AutoLimited: Not applicable.
Manual: Turn the autofocus off and adjust the camera focus manually.
Cameras Camera [n] Mirror
n: 1..1
With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies
both to the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/Off/On
Auto: If the camera detects that it is mounted upside down, the image is automatically
mirrored. If the camera cannot auto-detect whether it is mounted upside down or not,
the image is not changed.
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration
Peripherals
Maintenance
Cameras Camera [n] Whitebalance Mode
n: 1..1
Define the camera white balance mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/Manual
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.
Cameras Camera [n] Whitebalance Level
n: 1..1
Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be
set to manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
Value space: Integer (1..16)
The white balance level.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
115
Administrator Guide
Device settings
Device settings
Appendices