Cisco TelePresence SX10 Quick Set Administrator's Manual page 11

Cisco TelePresence SX10 Quick Set

Introduction Introduction
New features and improvements in CE9.8
New products
The Cisco Webex Boards, which previously have been
available only for cloud registration, are now also available
for on-premises registration:
• Cisco Webex Board 55/55S
• Cisco Webex Board 70/70S
• Cisco Webex Board 85S
Support for USB headsets
(Room Kit, Room Kit Mini, Room 55)
You can connect a USB Headset, Handset or USB
Bluetooth dongle to the USB-A port on the devices. This
is similar to the DX series.
Extended support for HTTP requests
Since CE9.6 a device has been able to send arbitrary
HTTP(S) Post and Put requests to an HTTP(S) server.
This feature is extended to support more request types
(Get, Patch, and Delete), and also to handle data that is
returned from the server (response headers and body).
Improved USB-C experience
(Room Kit Mini)
The Room Kit Mini is in USB camera mode only when it is
streaming media to a computer over the USB-C port. In
previous releases it was sufficient that at computer was
connected to the USB-C port.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
Add participant to CMS conference from the
device UI
(All products)
Any user can add another participant to an ongoing CMS
conference using the user interface of the device. This
also includes PSTN calls. When the participant accepts
the call, the participant will be added to the same CMS
conference.
In this case the device will tell the CMS to dial the
participant using the Active Control mechanism. Then the
CMS will dial directly to the participant you want to add.
For this feature to work, Active Control must be
enabled on the device, the call protocol must be
SIP, and the CMS must be on version 2.4 or higher.
The feature doesn't work if multipoint mode is set to
CUCMMediaResourceGroupList.
(All products)
Register a device to Cisco Webex using API or
local web Interface
You can register a device to Cisco Webex remotely, so
you don't have to be in the same room as the device. You
can do this programmatically from the API or use the local
web interface. In earlier releases you had to use the on-
screen setup assistant.
From the web interface, you can only start Webex
registering if the device is not currently registered
anywhere. If you are using the API, you can start Webex
registering even if the device is currently registered to an
on-premise system (CUCM or VCS).
Maintenance
(All products)
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
11
Administrator Guide
Device settings Appendices
Pre-installed list of Certificate Authorities -
CAs
(All products)
A list of commonly used CA certificates are pre-installed
on the video conferencing device. The device uses this
list when validating certificates from external servers that
it communicates with:
• HTTP servers that host content used by the HttpClient
API or macros
• SMTP mail servers (only relevant for Webex Boards)
A factory reset does not delete the list.
xAPI over WebSocket: Authentication using
auth protocol header
(All products)
Authentication using an auth protocol header is
supported. This comes in addition to Basic authentication
using an HTTP header field.
This means that browser-based clients, which don't have
direct control over HTTP headers, can authenticate to a
device directly from the browser using Javascript.
More device settings can be provisioned from
Cisco UCM than before
(All products)
If the device is registered to Cisco UCM 12.5(1)SU1 more
settings and parameters can be provisioned from UCM
than before (Device > Product Specific Configuration
Layout). Also, if these settings are changed locally on the
device, the new value can be written back to the UCM.
Most of the device's public settings (xConfiguration), are
included. Exceptions are made for Network, Provisioning
and SIP settings.
See the Video Endpoints Management Overview section
in the ► Release Notes for Cisco Unified ommunications
Manager and the IM and Presence Service, Release
12.5(1)SU1 for more information.