Cisco TelePresence SX10 Quick Set Administrator's Manual page 33

Cisco TelePresence SX10 Quick Set

Introduction Introduction
NetworkServices SNMP SystemContact
OLD: User role: ADMIN
NEW: User role: ADMIN, INTEGRATOR
NetworkServices SNMP SystemLocation
OLD: User role: ADMIN
NEW: User role: ADMIN, INTEGRATOR
UserInterface ContactInfo Type
(SX10, DX70, DX80)
OLD: Auto/DisplayName/IPv4/IPv6/None/SipUri/SystemName
NEW: Auto/DisplayName/E164Alias/H320Number/H323Id/IPv4/IPv6/None/SipUri/
SystemName
Video Output Connector [1] CEC Mode
(SX10)
OLD: Default value: Off
NEW: Default value: On
Video Output Connector [3] Resolution
(SX80)
OLD: User role: ADMIN, INTEGRATOR
NEW: User role: ADMIN, INTEGRATOR, USER
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
(All products)
(All products)
Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
33
Administrator Guide
Device settings Appendices