Cisco TelePresence SX10 Quick Set Administrator's Manual page 38

Cisco TelePresence SX10 Quick Set

Introduction Introduction
Configuration changes in CE9.1
New configurations
Bluetooth Allowed
(DX70, DX80)
Bluetooth Enabled
(DX70, DX80)
Cameras Camera Framerate
(Room Kit)
NetworkPort [2] Mode
(DX70, DX80)
RoomAnalytics PeopleCountOutOfCall
(Codec Plus, Room Kit)
RoomAnalytics PeoplePresenceDetector
Room Kit)
Video Input Connector [n] CEC Mode
(Codec Plus, Room Kit)
Configurations that are removed
None.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
(SX20, SX80, MX200 G2, MX300 G2, MX700, MX800, Codec Plus,
Maintenance
Configurations that are modified
Conference DefaultCall Rate
(SX20, SX80, MX200 G2, MX300 G2, MX700, MX800, Codec Plus, Room Kit)
OLD: Default value: 3072
NEW: Default value: 6000
Conference MultiStream Mode
(SX80, MX700, MX800, Codec Plus, Room Kit)
OLD: Default value: Off
NEW: Default value: Auto
OLD: Off
NEW: Auto/Off
Network [1] IEEE8021X Password
(All products)
OLD: String(0, 32)
NEW: String(0, 50)
NetworkServices Wifi Enabled
(DX70, DX80)
OLD: Default value: False
NEW: Default value: True
Peripherals Profile TouchPanels
(SX80, Codec Plus, Room Kit)
OLD: Default value: NotSet
NEW: Default value: Minimum1
Standby WakeupOnMotionDetection
Room Kit)
OLD: Default value: Off
NEW: Default value: On
Video Input Connector [n] PresentationSelection
OLD: AutoShare/Manual/OnConnect
Codec Plus, Room Kit)
OLD: AutoShare/Desktop/Hidden/Manual/OnConnect
NEW: AutoShare/Desktop/Manual/OnConnect
Video Output Connector [1..2] MonitorRole
OLD: Default value: Connector [1]: First; Connector [2]: Second
NEW: Default value: Auto
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
38
Administrator Guide
Device settings Appendices
(SX20, SX80, MX200 G2, MX300 G2, MX700, MX800, Codec Plus,
(All products)
(SX10, SX20, SX80, MX200 G2, MX300 G2,, MX700, MX800,
(DX70, DX80)
(All products)
(Room Kit, Codec Plus)