Inputs/Outputs; Figure 30: Visualization Of The Process Values - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-111 Telecontrol Module Compact, 2 AI
8.1.2.1

Inputs/Outputs

Press the [I/O] button to display the process values of the inputs and outputs. The
process values displayed are valid if the on-line display is green.

Figure 30: Visualization of the process values

Process values pertaining to inputs are displayed in the upper portion of the
window and those pertaining to digital and analog outputs are displayed in the
lower portion of the window.
Digital inputs configured as counter inputs are highlighted in blue.
Displaying the Analog Values
The process values of the analog inputs are displayed with an 8-bit resolution.
Manual
Version 2.0.0
Operation 75