Multiplex Alarm Text; Figure 24: Configuring Multiplex Operation Alarm Texts; Table 26: Configuring Multiplex Operation Alarm Texts - WAGO 761-113 Manual

WAGO-TO-PASS® 761
761-113 Telecontrol Module Compact, 2 AI, Web
7.5.2.2

Multiplex Alarm Text

Select your TO-PASS
using the identifier. Select the Multiplex Table option under the Multiplex Input
entry. The input fields for the alarm texts pertaining to the 16 statuses are
provided on the right side.

Figure 24: Configuring multiplex operation alarm texts

Table 26: Configuring multiplex operation alarm texts

Alarm texts
Value 0 ... Value
15
Manual
Version 2.0.0
®
telecontrol module from the left side of the project tree
In these fields enter the texts to be transmitted in the message
when the corresponding status combination of digital inputs
DI1 ... DI4 are fulfilled.
Messages are not sent for status combinations without any
entries.
Parameterizing 59