Information On Ce Marking Of The Module; Eu Directive Emc; Scope Of Application; Note Installation Guidelines - DEUTSCHMANN AUTOMATION UNIGATE CX-CANopen - DeviceNet Manual

Information on CE marking of the module

1 Information on CE marking of the module
1.1

EU Directive EMC

The following applies to the module described in this User Manual:
Products which bear the CE mark comply with the requirements of EU Directive „Electromagnetic
Compatibility" and the harmonized European Standards (EN) listed therein.
The EU Declarations of Conformity are available at the following location for perusal by the
responsible authorities in accordance with the EU Directive, Article 10:
Deutschmann Automation GmbH & Co. KG, Carl-Zeiss-Straße 8, 65520 Bad Camberg, Ger-
many.
1.2

Scope of application

The modules are designed for use in the industrial sector and comply with the following
requirements.
Scope of application
Industry
1.3

Note installation guidelines

The module complies with the requirements if you
1. comply with the installation guidelines described in the User Manual when installing and oper-
ating the module.
2. also follow the rules below on installation of the equipment and on working on switch cabinets.
1.4

Installation of the unit

Modules must be installed in electrical equipment rooms/areas or in enclosed housings (e.g.
switch boxes made of metal or plastic). Moreover, you must earth the unit and the switch box
(metal box) or at least the top-hat rail (plastic box) onto which the module has been snapped.
1.5

Working on switch cabinets

In order to protect the modules against static electrical discharge, the personnel must discharge
themselves electrostatically before opening switch cabinets or switch boxes.
8
Requirement applicable to
Emitted interference
EN 55011, cl. A (2007)
Fieldbus-Gateway UNIGATE
Deutschmann Automation GmbH & Co. KG
Interference immunity
EN 61000-6-2 (2005)
®
CX C4Map - DeviceNet V. 1.0 25.9.20